home *** CD-ROM | disk | FTP | other *** search
- Path: dtek.chalmers.se!d3daniel
- From: d3daniel@dtek.chalmers.se (Daniel Hansson)
- Newsgroups: comp.sys.amiga.audio
- Subject: Re: Dominator Midi Sequencer V1.02
- Date: 8 Jan 1996 22:35:38 GMT
- Organization: Chalmers univ. of Technology
- Message-ID: <4cs67q$sa@nyheter.chalmers.se>
- References: <806.6556T1278T183@ping.be> <137cc$a831.1cb@news.nmaa.org> <amigo-0401962036380001@ip246.msp.primenet.com>
- NNTP-Posting-Host: mis.dtek.chalmers.se
- X-Newsreader: TIN [version 1.2 PL2]
-
- : In article <137cc$a831.1cb@news.nmaa.org>, Carlos Martins
- : <carlos@nmaa.org> wrote:
-
- : For some (realy bad) reazon, the programmer wrote the program for PAL
- : machines only! :( You have to leave the PAL screen tool type in the Icon
- : info and boot your A3000 in PAL mode to be able to use the program. :(
- : I sent the author email requesting NTSC screen support or at least
- : Workbench support so anybody ( from any country can use the software. You
- : should email him too, the more the better! :) His email address is in the
- : docs.
-
- Huh? I'm using it in Euro72! It opened an autoscrolling copy of the
- WB-screen without complaining! ...but I had to RTS/CTS handshake in the
- serial preferences.
-
- : Jose
-
- --
- __
- __///Daniel Hansson
- \XX/ d3daniel@dtek.chalmers.se | Laws of physics do not apply to me...
-